PIAGGIO Ape TM Скачать руководство пользователя страница 91

Страница: 91 / 160

13_24

Exhaust circulation system (EGR) (13_24)

Secondary air box - SAS (gasoline version)

Remove the two screws «

» of the aluminium SAS cover, without extracting the metal

pipe from the cover/sleeve. Remove the plastic cover and the plate, pull the sponge
out and wash with soap and water.

Dry with compressed air before reassembling. Reinstall the plate into the seat on the
two plastic and aluminium covers.

Replace the box sealing O-Ring housed in the cover seat at every disassembly.

TURN TO AN AUTHORISED PIAGGIO SERVICE CENTRE FOR THIS OPERA-
TION.

13_25

Tyres (13_25)

•

Periodically check the inflation pressure of each tyre.

•

Tyres feature wear indicators; replace tyres as soon as these indicators be-
come visible on the tyre tread.

•

Also check that there are no cuts on the sides of the tyres or irregular tread
wear; in such cases, contact an

authorised service centre

for the replace-

ment.

Characteristic

TYRES

4.50 - 10''

13 Maintenance

Содержание Ape TM

































































































































































Результаты поиска

Содержание Ape TM

Отзывы:

Бренды по названию

Популярные бренды

PIAGGIO Ape TM, Инструкция по эксплуатации

Результаты поиска

Содержание Ape TM

Отзывы:

Бренды по названию

Популярные бренды