6 Starting and Operating
P-88x.x5 Piezo Actuator
PZ266E
Version: 1.1.0
31
6.5
Short-Circuiting the P-88x.x5
The P-88x.x5 must be discharged (p. 30) and short-circuited before demounting (e.g., before
cleaning and transportation of the P-88x.x5) as well as for modifications.
Requirements
You have read and understood the general notes on installation (p. 15).
You have discharged (p. 30) the P-88x.x5 and disconnected it from the electronics.
Tools and accessories
Only for P-88x.x5
without
connector (condition as supplied):
−
Suitable shorting clamp (available on request)
Only for P-88x.x5
with
connector (p. 21):
−
Suitable shorting plug (available on request)
Short-circuiting the P-88x.x5
If the P-88x.x5 does
not
have a connector:
Short-circuit the stranded wires of the
discharged
P-88x.x5 with a suitable shorting
clamp or twist the stranded wires.
If the P-88x.x5 has a connector (p. 21):
Connect a suitable shorting plug with integrated discharge resistor to the voltage
connector of the P-88x.x5.