User Manual
P736T0002, applies to P-736.ZRxS PInano® Piezo Scanner Systems
CBo, 2021-09-20
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 5 / 27
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Downloading Manuals
INFORMATION
If a manual is missing or problems occur with downloading:
Contact our customer service department (p. 19).
Downloading manuals
1.
Open the website
www.pi.ws
.
2.
Search the website for the product number (e.g., P-736) or the product family (e.g.,
PInano®).
3.
Click the corresponding product to open the product detail page.
4.
Click
Downloads
.
The manuals are shown under
Documentation
.
5.
Click the desired manual and fill out the inquiry form.
The download link will then be sent to the email address entered.
Other Applicable Documents
The devices which are mentioned in this user manual are described in their own manuals.
Product
Document
E-709 digital piezo controller
PZ222E user manual
Safety
Intended Use
The P-736.ZRx PInano® Z piezo scanners and the E-709.PRG digital piezo controllers are
laboratory devices as defined by DIN EN 61010-1. They are intended to be used in interior
spaces and in an environment which is free of dirt, oil and lubricants.
Based on their design and realization, the Z piezo scanners are intended to position in
Z direction. They are designed to position a sample holder with suitable dimensions (e.g.,
a microscope slide holder or a Petri dish holder).
The Z piezo scanners can carry a maximum load of 0.5 kg. They are intended to be used with
M-545 microscope stages or with other suitable microscope stages.
The Z piezo scanners are to be mounted horizontally.
The intended use of the Z piezo scanner is only possible in combination with the E-709.PRG
digital piezo controller. The E-709.PRG controller provides the required operating voltages. To
ensure proper performance of the servo-control system, the controller is able to read out and
process the signals from the piezoresistive sensors.
