PI P-725.1CDE2, Руководство пользователя

Страница: 24 / 40

User Manual
P725T0010, applies to P-725
CBo/KSch, 8/27/2020
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 24 / 40
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.de , www.pi.ws
Mounting the P-725 using the Mounting Holes in the Base Body
(Optional)
NOTICE
Warping of the P-725 when mounted on uneven surfaces!
Mounting the P-725 on an uneven surface could warp the P-725. Warping reduces the
accuracy.

Mount the P-725 onto a flat surface. The recommended flatness of the surface is ≤10 µm.

For applications with large temperature changes:
Mount the P-725 onto surfaces that have the same or similar thermal expansion properties
as the P-725.
INFORMATION

Note that only the thread adapter on the objective side is required when mounting the
P-725 using the mounting holes in the base body.
The following figures serve as examples and can differ from your model.
Fig. 8: P-725.xxx (example view from above):
Mounting holes (black arrows) and locating holes
(hatched arrows) in the base body
Fig. 9: P-725.1CDE2 (example view from above):
Mounting holes (black arrows) and locating holes
(hatched arrows) in the base body
Requirements

You have read and understood the safety precautions (p. 6).

The P-725 is
not
connected to the electronics.

The flatness of the mounting surface is ≤10 µm.
Tools and accessories

Four M2.5 screws of suitable length (p. 34) for screwing the P-725 to the microscope

Optional: Two suitable locating pins (p. 34) for aligning the P-725

Thread adapter, objective side (refer to "Optional Accessories", p. 11).

Suitable screwdriver