5 Installation
22
Version: 1.2.0
PZ234D
P-62x Positioners
5.2
Fixing the P-62x and the Load
NOTICE
Mechanical overload of the platform!
High torques and high loads can overload the platform of the P-62x when fixing the load.
Mechanical overload can cause damage to the piezo actuators, sensors, and flexures of the
P-62x and lead to loss of accuracy.
Do
not
exceed the maximum permissible torque on the platform (p. 51) when fixing the
load.
Do
not
exceed the maximum permissible loads according to the specifications (p. 41).
Hold the load when tightening (or loosening) the screws.
NOTICE
Protruding screw heads!
Protruding screw heads can damage the P-62x.
Ensure that the screw heads do not protrude from countersunk holes so that they do not
interfere with the motion.
NOTICE
Excessively long screws!
The P-62x could be damaged by screws inserted too deeply.
Pay attention to the depth of the mounting holes in the platform (p. 48).
Use screws of the correct length for the respective mounting holes only.
NOTICE
Damage due to incorrectly tightened screws!
Incorrectly tightened screws can cause damage.
Pay attention to the torque range (p. 51) specified for the screws used during installation.
