7 Maintenance
P-56x Nanopositioners
PZ248E
Version: 1.0.0
33
d) Fasten the support frame to the mounting holes of the stage with the four
plastic screws. In the following figure, one of the screws is marked with an
arrow.
2. Pack the stage in the original packaging.
7.3 Cleaning the P-56x
Prerequisites
You have discharged the piezo actuators of the P-56x (p. 30).
You have disconnected the P-56x from the controller.
Cleaning the P-56x
Clean the surfaces of the P-56x with a cloth that is slightly dampened with a
mild cleanser or disinfectant (e.g. ethanol or isopropanol).
Do
not
do any ultrasonic cleaning.
