PI M-228 Series, Руководство пользователя, Страница: 22 / 49

5 Installation
18 Version: 2.0.0 MP86E M­­228 / M­­229 Linear Actuators
5.2 Changing the Tip
INFORMATION
A tip makes it possible to realize different mechanical connections to a load:

A flat tip allows a wide-area connection to a load.

A ball tip allows a punctiform connection to a load.
To achieve optimal repeatability:

Use a tip.

Make sure that the selected tip is completely screwed in and does not have any backlash.
The M-228.10S and M-229.25S are delivered with a preassembled flat tip. A ball tip is supplied
for all models.
Figure 3: Mounted flat tip (example illustration)
1 Tip (flat)
2 Wrench flat of the tip
3 Pusher
Requirements

You have read and understood the general notes on installation (p. 17).

You have made the M-228 / M-229 accessible for changing the tip.

The pusher is extended so far that you can comfortably reach the tip.
In the delivery condition, the pusher is extended far enough.
Tools and Accessories

Tip (p. 12) supplied

Open-end wrench AF 5