PI L-417. 9211E0B Series, Руководство пользователя

Страница: 23 / 42

8 Maintenance
NOTICE
Damage due to improper maintenance!
Improper maintenance can lead to misalignment and failure of the L-417.xx9211E0B.
►
Loosen screws only according to the instructions in this manual or the instructions of our
customer service department (p. 27) .
8.1 Maintenance Run
The maintenance run serves the purpose of distributing the existing lubricant.
The following intervals for the maintenance run depend on the operating conditions and the
period of use:
■
After 200 operating hours or at least after one 1 year
■
If the L-417.xx9211E0B is moved over a small travel range (<40 mm) during industrial
operation: After every 2000 motion cycles
Performing a Maintenance Run
1. Make sure that collisions between the L-417.xx9211E0B, the load to be moved, and the
surroundings are not possible over the entire travel range of the L-417.xx9211E0B. If
necessary, remove the load from the motion platform of the L-417.xx9211E0B for the
maintenance run.
2. Perform a maintenance run over the entire travel range:
a) Command the L-417.xx9211E0B to the end of a travel range and from there to the
opposite end of the travel range (see manual for the electronics).
b) If necessary: Command the L-417.xx9211E0B to a position, where the load can be
mounted onto the motion platform again and mount the load back onto the
L-417.xx9211E0B (p. 18) .
8.2 Relubricating
The L-417.xx9211E0B is equipped with a grease nipple for relubricating the drive screw. For
continuous industrial use, the lubrication intervals and the lubrication quantity must be
determined individually.
Use Klüber STABURAGS NBU 12/300 KP only as lubrication for the L-417.xx9211E0B.
If you have any questions on relubricating, contact our
customer service department (p. 27) .
8.3 Cleaning
Requirements
✓
You have disconnected the L-417.xx9211E0B from the electronics.
Other Materials Required
■
Soft, lint-free cloth
■ Mild cleaning agent or disinfectant
If you have any questions on the auxiliary materials recommended for the L-417.xx9211E0B,
contact our
customer service department (p. 27) .
8 MAINTENANCE L417M0015EN
‒
9/10/2019
23
M O T I O N | P O S I T I O N I N G