PI F-712.MA1 Скачать руководство пользователя страница 7

Страница: 7 / 45

User Manual

F712T0002, valid for F-712.MA1 and F-712.MA2

Mma, BRo, 12/6/2019

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 7 / 45

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

www.pi.ws

Safety

General Safety Instructions

The F-712 alignment system is built according to state-of-the-art technology and recognized

safety standards. Improper use can result in personal injury and/or damage to the F-712

alignment system.



Only use the F-712 alignment system for its intended purpose, and only use it if it is in a

good working order.



Read the user manual.



Immediately eliminate any faults and malfunctions that are likely to affect safety.

The operator is responsible for the correct installation and operation of the F-712 alignment

system.



Install the F-712 alignment system near the power source so that the power plug can be

quickly and easily disconnected from the mains.



Use the supplied components (power supply and power cord) to connect the F-712

alignment system to the power source.



If one of the supplied components for connecting to the power source has to be replaced,

use a sufficiently dimensioned component.

Organizational Measures

User manual



Always keep this user manual available with the F-712 alignment system. The latest

versions of the user manuals are available for download on our website.



Add all information from the manufacturer to the user manual, for example supplements

or Technical Notes.



If you give the F-712 alignment system to other users, also include this user manual as well

as other relevant information provided by the manufacturer.



Only use the device on the basis of the complete user manual. Missing information due to

an incomplete user manual can result in minor injury and damage to equipment.



Only install and operate the F-712 alignment system after you have read and understood

this user manual.

Personnel qualification

The F-712 alignment system may only be installed, started up, operated, maintained, and

cleaned by authorized and appropriately qualified personnel.

Содержание F-712.MA1














































Результаты поиска

Содержание F-712.MA1

Отзывы:

Похожие инструкции для F-712.MA1

Бренды по названию

Популярные бренды

PI F-712.MA1, Руководство пользователя

Результаты поиска

Содержание F-712.MA1

Отзывы:

Похожие инструкции для F-712.MA1

Бренды по названию

Популярные бренды