PI E-871.1A1N Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 226

PI E-871.1A1N Скачать руководство пользователя страница 6

1

Legal Information

The following company names and brands are registered trademarks of Physik Instrumente
(PI) GmbH & Co. KG:
PI®, PIC®, NanoCube®, PICMA®, PIFOC, PILine®, NEXLINE®, PiezoWalk®, PicoCube®,
PiezoMove®, PIMikroMove, NEXACT®, Picoactuator®, PInano®, NEXSHIFT®, PITOUCH®,
PIMag®, PIHera, Q-Motion®
The patents held by PI can be found in our list at

http://www.physikinstrumente.com/en/

about-pi/patents

.

Notes on brand names and third-party trademarks:
Microsoft® and Windows® are registered trademarks or trademarks of Microsoft
Corporation in the USA and/or other countries.
EtherCAT is a registered and licensed brand of Beckhoff Automation GmbH.
LabVIEW® is a trademark ofNational Instruments. Neither the driver software nor the
software programs offered by PI or other goods and services are connected to or sponsored
by National Instruments.
Python® is a registered trademark of Python Software Foundation.
BiSS is a registered trademark of iC-Haus GmbH.
The following designations are protected company names, trademarks or registered
trademarks of other owners:
Linux, MATLAB, MathWorks

© 2019 Physik Instrumente (PI) GmbH & Co. KG, Karlsruhe, Germany. The text, photographs,
and drawings in this manual are protected by copyright. With regard thereto, Physik
Instrumente (PI) GmbH & Co. KG reserves all rights. The use of any text, images and
drawings is permitted only in part and only when indicating the source.

Original instructions
First print: 1/30/2019
Document number: PZ285en, ASt

Subject to change. This manual is superseded by any new release. The latest versions of the
user manuals are available for

download (p. 10)

.

1 LEGAL INFORMATION

PZ285EN

‒

1/30/2019

6

M O T I O N | P O S I T I O N I N G

«
...
4
5
6
7
8
...
»

Содержание E-871.1A1N



































































































































































































































Отзывы:

Нет отзывов