manualshive.com logo in svg

PI E-871.1A1N, Руководство пользователя, Страница: 154 / 226

Поделиться
Скачать
PI E-871.1A1N Скачать руководство пользователя страница 154

POS? Get Real Position

Description:

Queries the current axis position.

Format:

POS?[{␣<AxisID>}]

Arguments:

<AxisID>

Axis ID

The value for all axes will be queried if no arguments are specified.

Response:

{<AxisID>=<float>

␊

}

<AxisID>

Axis ID

<float>

Current axis position in physical units

Troubleshooting:

Illegal axis identifier

RBT Reboot System

Used in: Controller Macros (93)

Description:

Restarts the electronics.

Long description

The electronics behave in the same way after restarting as they do
after switching on.
RBT cannot be used in macros.

Format:

RBT

RMC? List Running Macros

Used in: (95)

Description:

Queries all macros currently running.

Format:

RMC?

Response:

{[<MacroName>]

␊

}

<MacroName> Macro name

9  COMMAND REFERENCE

PZ285EN 

‒

 1/30/2019

154

M O T I O N   |   P O S I T I O N I N G

Содержание E-871.1A1N



































































































































































































































Отзывы:

Нет отзывов