PI E-727 Скачать руководство пользователя страница 45

Страница: 45 / 240

User Manual

E727T0005, valid for E-727

BRO, 2019-06-28

Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany

Page 45 / 240

Phone +49 721 4846-0, Fax +49 721 4846-1019, Email

[email protected]

www.pi.ws

Start the installation of the NI LabVIEW Run-Time Engine with

Install NI LabWindows/CVI

Run-Time Engine 2012 SP1



Note that the installation of the NI LabVIEW Run-Time Engine can take some time.



If you accidently close the separate window before the NI LabVIEW Run-Time Engine has been

successfully installed: Go to the \SingleSetups directory on the product CD and start the

installation by double-clicking the NI_LabWindows-CVI-RTE_2012_SP1_Setup.exe file.

Installing the PC software on Windows

Read "Important information on the procedure for installation on Windows" (p. 43).

Start the installation wizard by double-clicking the PI_E-727.CD_Setup.exe file in the

installation directory (main directory of the CD).

The

InstallShield Wizard

window for the installation of programs and manuals for the E-727

opens.

Follow the instructions on the screen.

You can choose between default installation (

Complete

) and user-defined installation

(

Custom

With default installation (recommended), all components are installed. These include among

others:

−

Driver for use with NI LabVIEW software

Exception: The Analog drivers component is provided for some PI controllers.

This component is only available through user-defined installation.

−

Dynamic program library for GCS

−

PIMikroMove

−

PC software for updating the firmware of the E-727

−

PI Update Finder for updating the PC software

−

For controllers that have a USB interface for communication with the PC: USB

drivers

With user-defined installation, you have the option of excluding individual components from

the installation.

Содержание E-727

















































































































































































































































Результаты поиска

Содержание E-727

Отзывы:

PI E-727, Руководство пользователя, Страница: 45 / 240

Результаты поиска

Содержание E-727

Отзывы: