Operation Manual
HDMI-401-MS
Introduction
4x1 HDMI Multiviewer /
Switch
The 4x1 HDMI multiviewer / switch provides a solution
to display up to 4 HDMI sources simultaneously on one
HDMI display at resolutions up to 1080p / 60Hz. The
device features full screen, dual screen, and quad
screen display modes, which can be switched through
a remote control or by the button located on the device
for easy configuration. Constructed with metal for
durability, the device is also wall mountable and comes
with the screws and hardware for easy mounting.
Physical Connection
Features
• Simultaneously display four HDMI sources on a single
display
• 4 x HDMI inputs and 1 x HDMI output
• Supports resolutions up to 1080p / 60Hz
• Supports full screen, dual screen, and quad screen
display modes
• Modes can be switched through remote control or by
the button in front of the device
• Wall mountable design
• Metal casing for durability
6. HDMI Signal Input
1. 12V DC Input
2. HDMI Signal Output
3. Audio Button
4. Mode Button
5. IR Signal Input
Front Panel
Remote Control
Rear Panel
Connection Diagram
3 4
1
2
HDMI 4X1 QUAD MUL
TI-VIE
WER SWITCHER
OUTPUT
HDMI
AUDIO
DC 12V
MODE IR
OUTPUT
HDMI
AUDIO
DC 12V
MODE IR
1
2
3 4 5
INPUT
HDMI 2
HDMI 3
HDMI 4
HDMI 1
6
2
1
4
3
1
2
3
4
1
2
3
4
RES
HDMI 4x1 Quad Multi-Viewer Switcher
A
HDMI Display
HDMI Sources (Supports up to 4)
AUDIO INPUT(9-16)
AUDIO
OUTPUT
VGA
HDMI
LAN
AUDIO
INPUT
VIDEO INPUT
15
13
11
9
7
5
3
1
1
3
4
5
6
7
8
2
16
14
12
10
8
6
4
2
G
+ -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ALARM
SENSOR
RS485
HDMI Output
HDMI Inputs
HDMI Switch
1. Connect HDMI sources to the HDMI inputs on the
4x1 HDMI Multiviewer / Switch.
2. Connect a HDMI cable from the HDMI output on
the 4x1 HDMI Multiviewer / Switch to a HDMI
display.
3. The display layout can be controlled via the
remote control or push button on the switch itself.
Connection Instructions
