11
www.phywe.com, © All rights reserved
12620-09 and 12620-10 / 2715
5.4.13
Utilities/Water level (6.2)
Here, you can select a water level that can be used to align
experiments horizontally and vertically on a plane or on a
wall.
Alignment on a plane:
Lay the instrument flat on its back and align the surface until
the bubble is located precisely in the centre of the crosshairs.
Horizontal and vertical alignment:
Set up the instrument on its side and hold it against a rail or
similar that is to be aligned. The rail is aligned when the bub-
ble is located between the lines.
In order to tare the water level to 0, press the right arrow
key
► and confirm with
or reject with
◄.
5.4.14 Extras/ GPS (6.3)
Here, the geographical coordinates of the current location are
indicated.
The indication is in degrees, minutes, and seconds.
This menu item can only be used in combination with a Mo-
bile-Link 2 GPS (12620-20) and GPS activated.
See also chapter 5.4.9.
Coordinates will not be displayed unless satellites have been
found. In addition, the successful detection of satellites is
indicated by an icon in the header.
Satellites found
No satellites found
6
HANDLING VIA A PC
6.1 Start-up
First, all of the necessary drivers and operating programs that
can be found on the CD must be installed on the PC. This
requires the full version of the "measure" software, part no.
14550-61.
Fig. 26: Display of the "Water level" of the Cobra4 Mobile-
Link 2 on a plane (level).
Fig. 27: Display of the "Water level" of the Cobra4 Mobile-
Link 2 in a vertical/horizontal position.
Fig. 29: Display of the Cobra4 Mobile Link Mobile-Link 2 when
it is connected to a PC via the USB port.
Fig. 28: GPS coordinates in case of detected satellites
Weather 01
Water Level
Water Level
GPS
Menü
Menu > Extras
Latitude:
Longitude:
51°38‘12“
51°38‘12“
