ProfiNet / ProfiBus interfaces
MA 1263-A010 EN
12
Leave the current files on the ftp server, so a module recently inserted into the
phy
MOTION
TM
is automatically updated to the latest firmware status, which is
stored on the ftp server.
IMPORTANT: It is only checked whether the update version of the ftp server
differs from the version of the module. Therefore, you can set the firmware
back to an older version by replacing the file on the ftp server with the older
firmware file.
7.2 Download of
phy
LOGIC
TM
Programs (Scripts)
•
Write a script in
phy
LOGIC
TM
, then save it with the name <no>.mpr. There are
possible more than 1 to 255 as <nr> program name.
•
Open the Windows Explorer and enter in the command line:
//ftp <IP address of the
phy
MOTION
TM
>
The IP address is assigned by the PLC after the initialisation.
•
Enter in the ftp client window:
User name: Phytron
Password: Phytron
Confirm with the button LOGIN.
•
Open the folder in a second window where the sequential programs for the
phy
MOTION
TM
are stored, e.g.:
1.mpr
sequential program 1 for stepper motor controller
2.mpr
sequential program 2 for stepper motor controller
255.mpr sequential program 255 for stepper motor controller
•
Save the required sequential programs by drag and drop on the ftp server
•
After restart or reset all „mpr“-files are transmitted from the ftp server to the MCM
module and then are automatically deleted on the ftp server.
