phytron phyMOTION POWM01.1 страница 30 Скачать руководство пользователя

Страница: 30 / 31

Manual POWM01 / POWM02

MA 1273-A004 EN

10 Warranty, Disclaimer and Registered Trademarks
10.1 Disclaimer

Phytron GmbH has verified the contents of the manual to match with the

hardware and software. However, errors and omissions are exempt and phytron GmbH

assumes no responsibility for complete compliance. The information contained in this

publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

10.2 Warranty

The

phy

MOTION

modules are subject to

legal warranty

. phytron will repair or exchange

devices which show a failure due to defects in material or caused by the production

process. This warranty does not include damage caused by the customer, for example, not

intended use, unauthorized modifications, incorrect handling or wiring.

10.3 Registered Trademarks

In this manual several trademarks are used which are no longer explicitly marked as

trademarks within the text. The lack of these signs may not be used to draw the conclusion

that these products are free from third parties' rights. For example, some product names

used herein are:

•

phy

MOTION

is a trademark of Phytron GmbH.

•

phy

LOGIC

is a trademark of Phytron GmbH.

•

Microsoft is a registered trade mark and WINDOWS

is a trade mark of the

Microsoft Corporation in the USA and other countries.

Содержание phyMOTION POWM01.1
































Результаты поиска

Содержание phyMOTION POWM01.1

Отзывы:

Похожие инструкции для phyMOTION POWM01.1

Бренды по названию

Популярные бренды

phytron phyMOTION POWM01.1, Руководство пользователя

Результаты поиска

Содержание phyMOTION POWM01.1

Отзывы:

Похожие инструкции для phyMOTION POWM01.1

Бренды по названию

Популярные бренды