Manual POWM01 / POWM02
MA 1273-A004 EN
18
5.2 Electrical Installation
Ensure sufficient bending radius of the cables during installation. Do not lay the cables in
tension or bend them.
We recommend labelling the mating connectors to prevent interchanging the connectors.
If all the connections are made, the last step is to plug in the power supply to the mains.
5.2.1 Connectors - Overview
Connector Number
of pins
Connector on the
module (Phoenix)
Mating connector
(Phoenix)
Mating connector
ID number
+(24…70) V
Supply
1x2
PC4/2-G-7,62
PC4/22-ST-7,62
10014443
+24 V Supply 1x2
MCDN1,5/2-G1-3,5P26 FMC1,5/2-ST-3,5
10007077
The mating connector is included in delivery of the module and is usually plugged into the
module at the factory.
