Manual POWM01 / POWM02
MA 1273-A004 EN
12
4.3 Features POWM01
Features
Power supply
24…70 V
DC
/ 20 A max. (motor supply U
B
)
+24
V
DC
(
±20 %)
electrical isolated / 5 A max. (I/O supply)
Voltage range
between 24...70 V
DC
and 24 V
DC
I/O
Current capacity
20 A max. / U
B
, 5 A max. / +24 V
DC
Power loss
1400 mW at U
B
= 70 V
DC
Over voltage protection
no
Short circuit protection
Logic voltage (5 V): auto-reset 2.6 A
U
B
: 2 x 10 A
Diagnostics
2 status LEDs on the front panel
Switch/button
DIP switch for adjusting the controller’s address
Remote/Local switch
Reset button
Interfaces
24-70 V
DC
Motor-Supply
24 V
DC
to 70 V
DC
input range for the supply of the power
stages and for generating the internal logic supply.
24 V
DC
I/O-Supply
Separate 24 V
DC
for the supply of I/Os (e.g. digital
inputs/outputs of the DIOM01), limit and reference switches
(e.g. on the I1AM01, INAM01 and EXAM01).
USB
USB interface for parameterising and programming of the
phy
MOTION
TM
.
Touch panel
4 pin Western modular connector flat oval 4p/4K for the
connection of an external touch panel
Bus connection rear panel
Module supply of the
phy
MOTION
TM
5 V
Logic
: 2 A max.
The number of connected modules after a POWM01 depends on the total current of all
modules in a voltage group. This sum may not exceed the maximum current capacity
(20 A)!
