Manual INAM01 / INAM02
MA 1275-A004 EN
36
5.2.7 Option: Motor Temperature Sensor Connection X3/X4
The temperature evaluation module is used for monitoring the stepper motor temperature.
Depending on the selected evaluation module (KTS01 or PTS01) thermal elements type K or
platinum sensors PT100 can be used.
The insulated temperature sensor in phytron motors is integrated in the motor windings. The
response time is very short, compared to temperature sensors mounted outside the motor housing.
The temperature is measured all the time, even if only one motor phase is powered at any one
time.
Thermal element type K
With the Type K (NiCr-Ni) in-vacuum and cryo stepper motors, thermal elements in the
temperature range from –270 to +1370 °C, accuracy class 1, are used.
The Type K is a metal thermal element with nickel-based alloy conductors. Temperature ranges,
accuracy and characteristics of thermal elements for industrial use are defined in the IEC 584
standard (temperature measuring with thermal elements).
Fig. 8: K element connection
Principle of the stepper motor temperature measurement by element type K:
Содержание phyMOTION INAM01.1
