phytron phyMOTION INAM01.1, Перевод оригинального руководства

Страница: 19 / 45

phytron
19 MA 1275-A004 EN
5.2 Electrical Installation
Ensure sufficient bending radius of the cables during installation. Do not lay the cables in tension
or bend them.
We recommend labeling the mating connectors to prevent interchanging the connectors.
If all the connections are made, the last step is to plug in the power supply to the mains.
5.2.1 Connectors - Overview
Connector Number
of pins Connector on the
module (Phoenix) Mating connector
(Phoenix) Mating connector
ID number
INAM01:
Motor (X5) 1x4 IC 2,5/4-G-5,08 IC 2,5/4-ST-5,08 10005390
INAM02:
Motor (X5) 1x4 IC 2,5 HC/ 4-G-5,08 FKIC 2,5 HC/4-ST-
5,08 10015856
Limit switches
(X2) 1x10 MCDN1,5/10-G1-
3,5P26 FMC1,5/10-ST-3,5 10013217
Encoder (X1) 1x10 MCDN1,5/10-G1-
3,5P26 FMC1,5/10-ST-3,5 10013217
Temperature
evaluation
(X3/X4) 2x2 MCDN1,5/2-G1-
3,5P26 FMC1,5/2-ST-3,5 10007077
The mating connector is included in delivery of the module and is usually plugged into the module
at the factory.
i
CAUTION – Possible damage!
Damage of the module by wrong connection.
- Do not exchange the 10-pin connector for limit switches with the
10-pin connector for the encoder evaluation. Module and encoder can be
damaged.