phytron 10004904, Руководство пользователя, Страница: 13 / 53

Manual MSX
MINI
MA 2107-A005 EN 12
2 Technical Data Table
Technical Data
Stepper motor
Two-phase stepper motors with 4, 6 or 8-lead wiring scheme
Winding resistance < 10 Ohm
Winding inductance should be higher than 0.5 mH per phase
Step resolution and
Current shape
Step resolution and Current shape are set by rotary switch:
Step resolution:
1/1, 1/2, 1/4, 1/5, 1/10, 1/20 of a full step with or without torque
compensation (DMA), current shaping (CS), BLOW UP
Factory settings:
Rotary switch ‚6‘: Half step with DMA without CS
Phase currents Run and stop current can individually be set by rotary switches.
Factory settings:
Rotary switch run current: ‚F‘
Rotary switch stop current: ‚3‘
without Boost
2.4 to 8.4 A
r.m.s.
with Boost
3.1 to 10.9 A
r.m.s.
I
max
15.4 A
Peak
Supply vU
B
nominal: +60 to 120 V
DC
Admissible range: 40 to 160 V
DC
Reinforced or double insulation between mains and secondary
circuit.
Supply voltage
optocoupler
+5/24V_Opto towards 0V_Opto: 5 or 24 V
I
Supply DC
The power requirement extensively depends on the motor
current and the motor. The value is limited to: 10 A