Phytec phyCORE-P87C591, Быстрый старт

Страница: 48 / 84

phyCORE-P87C591 QuickStart Instructions
44
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
3.8 “Hello2”
A return to the “Hello” program allows a review of how to modify
source code, create and build a new project, and download the
resulting output file from the host-PC to the target hardware. For
detailed commentary on each step, described below in concise form,
refer back to the “Blinky2” example starting at section 3.2.
3.8.1 Creating a New Project
•
Start the Raisonance RIDE environment and close all projects that
might be open.
•
Open the Project menu and create a new project called Hello2.prj
within the existing project folder
C:\PHYBasic\pC-P87C591\Demos\Raisonance\Hello2
(default location) on your hard-drive. Select the 80C51
architecture for this project.
•
Add Hello2.c and Serinit.c from within the project folder to the
project Hello2.prj.
•
Save the project.
At this point you have created a project called Hello2.prj consisting
of the C source files Hello2.c and Serinit.c.