phyCORE-ADuC812 QuickStart Instructions
50
© PHYTEC Meßtechnik GmbH 2002 L-462e_2
3.8.6
Starting the Terminal Emulation Program
•
Start HyperTerminal and connect to the target hardware using the
following COM parameters: Bits per second = 9.600;
Data bits = 8; Parity = None; Stop Bits = 1; Flow Control = None.
•
Resetting the phyCORE Development Board LD 5V (at S2) will
execute the Hello2.hex file loaded into the Flash.
•
Successful execution will send the modified character string
"PHYTEC... Stick It In!" to the HyperTerminal window.
•
Click the Disconnect icon . .
•
Close the Hyper Terminal program.
You have now modified source code, recompiled the code, created a
downloadable hexfile, and successfully executed this modified code.
Содержание phyCORE-ADuC812
Страница 78: ...phyCORE ADuC812 QuickStart Instructions 74 PHYTEC Meßtechnik GmbH 2002 L 462e_2 ...
Страница 84: ...phyCORE ADuC812 QuickStart Instructions 80 PHYTEC Meßtechnik GmbH 2002 L 462e_2 ...
Страница 86: ...Published by PHYTEC Meßtechnik GmbH 2002 Ordering No L 462e_2 Printed in Germany ...