Phytec phyCORE-167CR, Руководство по оборудованию

Страница: 106 / 114

phyCORE-167CR/167CS
96

PHYTEC Meßtechnik GmbH 2002 L-527e_8
15.2.1 The Quad-Connector
The quad-connector is the safest and most reliable method of
connecting the debug hardware to a Hitex or NOHAU Emulator. The
interface contains all C167CR/C167CS processor signals and power
pins. In addition, the quad-connector is also the most inexpensive
emulator interface solution available on the market.
Quad-Connector X2 A Quad-Connector X2 B
Pin Signal Signal Pin
1 NC NC 2
3 P6.0 P6.1 4
5 P6.2 P6.3 6
7 P6.4 /HLD-P 8
9 P6.6 P6.7 10
11 P8.0 P8.1 12
13 P8.2 P8.3 14
15 P8.4 P8.5 16
17 P8.6 P8.7 18
19 VCC GND 20
21 P7.0 P7.1 22
23 P7.2 P7.3 24
25 P7.4 P7.5 26
27 P7.6 P7.7 28
29 P5.0 P5.1 30
31 P5.2 P5.3 32
33 P5.4 P5.5 34
35 P5.6 P5.7 36
37 P5.8 P5.9 38
39 NC NC 40
Pin Signal Signal Pin
41 NC NC 42
43 VREF VGND 44
45 P5.10 P5.11 46
47 P5.12 P5.13 48
49 P5.14 P5.15 50
51 GND VCC 52
53 P2.0 P2.1 54
55 P2.2 P2.3 56
57 P2.4 P2.5 58
59 P2.6 P2.7 60
61 GND VCC 62
63 P2.8 P2.9 64
65 P2.10 P2.11 66
67 P2.12 P2.13 68
69 P2.14 P2.15 70
71 P3.0 P3.1 72
73 P3.2 P3.3 74
75 P3.4 P3.5 76
77 GND VCC 78
79 NC NC 80