Introduction
PHYTEC Messtechnik GmbH 2018 L-823e_2
1
1
Introduction
1.1
Hardware Overview
The phyBOARD-Regor for phyCORE-AM335x is a low-cost, feature-rich software
development platform supporting the Texas Instruments AM335x microcontroller.
Moreover, due to the numerous standard interfaces, the phyBOARD-Regor AM335x can
serve a foundation for many applications. At the core of the phyBOARD-Regor is the
PCM-051/phyCORE-AM335x System On Module (SOM), containing the processor, DRAM,
NAND Flash, power regulation, supervision, transceivers, and other core functions required
to support the AM335x processor. Surrounding the SOM is the PBA-C-08/phyBOARD-Regor
carrier board, adding power input, buttons, connectors, signal breakout, and Ethernet
connectivity amongst other things.
1.1.1
Features of the phyBOARD-Regor AM335x
The phyBOARD-Regor AM335x supports the following features :
•
Developed in accordance with PHYTEC's new SBCplus concept (
•
PHYTEC’s phyCORE-AM335x SOM
•
Phoenix Contact ME Max 3U1 standard dimensions
•
Boot from SD card or NAND Flash
•
Max. 1 GHz core clock frequency
•
Single supply voltage of 24 V ±10 % via 1×5 position Phoenix Contact MINI COMBICON
connector 3.5 mm) or via Card Edge connector
•
Two RJ45 jacks for 10/100 Mbps Ethernet
•
Two USB OTG interfaces available (one at USB Micro-AB connector and one at the
expansion connector)
•
One Secure Digital / Multi Media Memory Card interface brought out to a Micro-SD
connector
•
2 x RS-232 transceivers supporting UART0 and UART2 with data rates of up to 1 Mbps at
1×5 position Phoenix Contact MINI COMBICON connector 3.5 mm
•
RS-485 transceiver supporting UART1 with data rates of up to 1 Mbps at 1×5 position
Phoenix Contact MINI COMBICON connector 3.5 mm
•
CAN interface at 1×5 position Phoenix Contact MINI COMBICON connector 3.5 mm
•
Reset-Button
•
RTC with memory backup capacitor (Gold Capacitor, lasts approx. 7 days)
•
Expansion connector with different interfaces
•
Card Edge connector to incorporate a DIN rail bus connection
