Phytec FireWire-CAM-001, Руководство пользователя

Страница: 39 / 86

First Steps

PHYTEC Messtechnik GmbH 2005 L-661d_1
33
•
The image display is too slow / flickers
- You can set the display speed (see next section)
- It is possible that your computer’s processor performance
is too low
•
The picture flickers under artificial lighting
- Adjust the picture frequency to the frequency of the artificial
lighting. The maximum camera frequency is 30 Hz, which
results in interference with the 50 Hz mains frequency in Europe.
Use the setting „Frame Rate Reduction“ in the dialog „Advanced
Settings“ (see next section).
2.5.3 Adjusting Camera Settings
The FireWire-CAM-001 and -002 offer a large number of setting
options, which can be adjusted via software from the computer.
The setting options are grouped in multiple dialogs (menus).
Depending on the application the call of the dialogs can occur at
various locations.
This section provides a brief overview of the setting options and the
call of the dialogs in the program AMCap. A complete description of
the functions can be found in section 3.4
•
Setting the Video Format
Setting in AMCap:
Options
4
Video Capture Pin...
Here you can make basic settings for the image format and color
depth. The highest picture quality can be achieved by setting the color
depth to RGB24 (for FCAM-002) or Y800 (for FCAM-001).
In addition to this you can mirror the picture horizontally and/or
vertically, set the picture size and the picture refresh rate (these
settings are not effective in all applications).