Phybridge NVT PoLRE Series, Руководство пользователя

Страница: 40 / 52

36
5 . A D M I N P A G E
A d m i n > T e r m i n a l
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
Using the Command Line Interface
1. Double-click in the Command field to see a list of available commands.
2. Click a command in the list to select it.
3. If necessary, enter any options for the command.
NOTE
See "Command Reference" on page 37 for a list of command options and syntax.
4. Press ENTER to run the command.
The results of the command appear in the area below the command. When a new command is run, the
results are appended to the results from the previous command.
You can now do the following:
•
Modify the text in the results area (make changes, delete text, add comments, copy and paste,
etc.). Right-click in the results area to view editing options such as copy, paste and spell-check.
• Click SAVE to save the results in a text file. When the file download is complete, the file should be
shown in the bottom-left corner of your browser (Chrome) or in the Downloads window (Firefox).
Double-click the file to open it. The filename for the exported file uses the convention
hostname_terminal_date_time.txt . This allows you to easily identify which switch the file was
exported from.
Adding notes to the switch
You can save notes on the switch. These notes are seen by all operators with access to the Simple
Network Manager.
1. Type a note in Notes area. You can modify the note the same way you can modify the command
results (make changes, delete text, add comments, copy and paste, etc.). Right-click in the Notes
area to view editing options such as copy, paste and spell-check.
2. Click SAVE .