Phybridge NVT PoLRE Series, Руководство пользователя

Страница: 30 / 52

26
5 . A D M I N P A G E
A d m i n > S e t u p
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
System Settings
Use to configure basic switch settings. After modifying a setting, click APPLY . The updates will be applied
immediately to the switch.
Host Name
Switch host name.
Date
Time Switch date (YY-MM-DD) and time (HH:MM).
PoE Voltage
Defaults to 54V which is the recommended voltage for PoE. Range from 48 – 56V; use
slider to adjust. Click APPLY.
Admin Password
Confirm
Password
Simple Network Manager password. To change the password, enter the new
password in both of these fields.
NOTE
You will be prompted to log back into the Simple Network Manager after changing the
password.
Contact Contact information (e.g. technical support).
Diagnostic
Counters
Resets only the diagnostic counters.
Uplink Counters Resets all counters for the gigabit ports (transmit/receive counts, errors, broadcasts,
and multicasts).
Downlink
Counters
Resets all downlink counters (transmit/receive counts and errors).