Z- axis Calibration
Z-axis calibration is essential for every 3D printer. Run this test to make sure that the
building plate is leveled to the LCD screen. This is to ensure that models and prints
will adhere to the building plate.
SONIC MIGHTY 8K
Step 1:
Remove the Resin Vat
Make sure to remove any objects present on the machine's platform.
Step 2:
Install the Building Plate
Attach the building plate to the printer. Screw and tighten the building plate.
Step 3:
Loosen the Screws
Use the Allen wrench to loosen all 4 screws on the sides of the building plate. After
loosening it, double-check to see if the plate is loose and movable.
Step 4:
Place a piece of paper on the LCD
Prepare a piece of A4 paper (roughly 0.07-0.10 mm) and lay it flat on the LCD screen. This
piece of paper will be used for leveling the building plate.
