Phottix Odin TTL Trigger for Canon
Parts
Transmitter Control Unit (TCU)
1. LCD Screen
2. Options Button
3. Mode Button
4. Zoom Button
5. Power Button
6. LED
7. + / - / Selection Buttons
8. Test Button
9. Clear Button
10. High Speed Sync / Second Curtain Sync Button
11. LCD Backlight Button
12. USB Port
13. Battery Compartment
14. Locking Ring
15. Hot Shoe
Please Note:
After adding turning on the Phottix Odin TCU and receivers you
must take one photograph for the TCU to
“
learn
”
about your camera and flashes.
The first shot you take will not be properly exposed. Subsequent images will be
correct.
Slave mode does not need to be set on flashes on Phottix Odin receivers.
Many TTL flashes have been tested but the manufacturer cannot guarantee that
all third party TTL flashes will function properly with the Phottix Odin. It has been
designed and optimized for original Canon flashes using the ETTL II system.
Tip:
Turn off all devices
–
flashes/strobes, cameras, and the Phottix Odin TCU
and receivers - when connecting and disconnecting devices.
