Photron FASTCAM SA-Z, Руководство по оборудованию

Страница: 82 / 119

Chapter. 3 Recording
3.26. 8bit Recording Mode
Since the image sensor of 12 bits specification is being used for this product, it is usually recorded at
12 bits. By using 8 bits Recording Mode Mode, it is possible to record by 8 bits.
When data is recorded in the 8-bit mode, the amount of data is smaller than in 12-bit mode.
Therefore, it is possible to record for a longer amount of time.
8bit Recording Mode setting can be made with the “Remote controller (optional)" or PFV.
•
For the details of a 8 bit Recording Mode setup, refer to
「
5.1.8. Recordable Image Count/
Resolution(Bit depth)
」
,Page 88
3.27. Fan Controll
This product has Fan Controll feature which makes it possible to stop the cooling fan temporarily.
This feature works only within a range of temperature in which the current temperature does not
adversely affect the operation of the camera. While the camera is in operation, the fan automatically
stops and starts detecting the current temperature within the camera: the fan stops as soon as the
temperature gets lower than the preset temperature, and starts when the temperature gets to the
higher limit.
•
For steps to activate Fan Controll feature, see Photron FASTCAM Viewer User’s Manua.
3.28. TRG-EXP (time between trigger and exposure) Display
This camera system has a function to display the time delay between the trigger entry and start of
exposure.
TRG-EXP data is only displayed during playback from memory and is not displayed in LIVE MODE.
The data is included in the cih file after saving
•
TRG-EXP function does not work in RANDOM RESET, REC ON CMD or RANDOM LOOP trigger
mode.
70