Photron FASTCAM Mini WX100, Руководство по оборудованию

Страница: 58 / 100

Chapter. 3
Functions
3.15.
Using External Triggers
With the system, you can record by receiving various trigger signals matched to the recording
application. The trigger signals that can be used on the system are explained here, along with a
description of how to use them.
3.15.1. Inputting an External Trigger Signal
The external trigger signals that can be used with the system and their input system are listed below.
Connector Name
(Input System)
Menu Signal
INPUT
TRIG POS
FET Input 0V - +12V (H level +2.5V to +12V), Positive
Polarity
TRIG NEG
FET Input 0V - +12V (H level +2.5V to +12V),
Negative Polarity
TRIG SW IN None Contact signal
When a trigger signal is input to INPUT connector, this item should be set to a signal type.
Use caution not to input more than specified voltage or current to the INPUT trigger signal
inputs as there is a risk of damage to the equipment.
•
For the setting method of the signal inputted into INPUT, refer to “3.17.1. INPUT / OUTPUT Signal
Settings”, page 55.
46