How to Connect with
Roger TableMic
II
General Operation
Device Description
1.
On/Off/ Mute
2.
Microphones and indicator light
3.
Audio input
4.
Charging input
5.
Connect
•
To switch on
, press the On/Off button on the side of the Roger
TableMic II until the indicator light turns green.
Figure 1
•
To connect
, hold your Roger TableMic II close (within
10 cm/4 inches) from the Roger receiver.
•
Press the connect button on your Roger TableMic II.
Figure 2
•
To switch off
, press the On/Off button on the
side of the Roger TableMic II for 3 seconds.
•
When charging
with the supplied USB power cord,
the indicator lights will flash green. When fully
charged you will see a solid green light.
1
3
4
2
5
1s
Figure 1
Figure 2
