Phoenix RPC12 Series, Справочное руководство CLI

Страница: 77 / 245

78 Phoenix RPC12 Series CLI Reference Manual • September 2008
delete vdisk
Description
Deletes one or more virtual disks, disassociates all disk drives that are assigned to
the virtual disks, and unmaps all volumes of the virtual disks from all host channels.
Caution – Deleting a virtual disk will delete all data on that virtual disk.
Note –
You cannot delete a virtual disk that contains a snap pool associated with a
master volume on another virtual disk. You cannot delete a virtual disk that is
reconstructing.
Input
Example
Delete two virtual disks.
delete vdisk
vdisks
[prompt yes|no]
Parameter Description
vdisks
Specifies the virtual disks to delete. For the syntax to
use, “Virtual Disk Syntax” on page 25.
prompt yes|no
Optional. Specifies an automatic response to the
prompt that appears if a utility is running on the
vdisk:
•
yes
: Stops the utility and enables the deletion to
proceed
•
no
: Prevents the deletion from proceeding
If this parameter is omitted, you must manually reply
to the prompt.
#
delete vdisk VD1,VD2