Phoenix RPC12 Series, Справочное руководство CLI

Страница: 179 / 245

180 Phoenix RPC12 Series CLI Reference Manual • September 2008
show master-volumes
Description
Shows information about master volumes associated with a specified controller or
snap pool. If no parameters are specified, information about all master volumes is
shown.
Input
Output
show master-volumes [controller a|b] [snap-pool
volume
]
Parameter Description
controller a|b
Optional. Only includes master volumes owned by controller
A (upper) or controller B (lower).
snap-pool volume
Optional. Only includes master volumes associated with a
specified snap pool volume name or serial number. For the
syntax to use, see “Volume Syntax” on page 25.
Field Description
Vdisk
Virtual disk name
Serial#
Master volume serial number
Name
Master volume name
Size
Total size of the master volume
Status
Indicates whether the master volume is valid or offline, or the
associated snap pool is offline
Snap-pool Name
Name of associated snap pool
Snapshots
Number of snapshots that exist for the master volume
Snap Data
Amount of snap-pool space occupied by this master volume
for its associated snapshots (preserved and write data)
Rollback
Either the percent complete if rollback is in progress, or
“
---
” if rollback is not in progress