YAK54 MK2
Instruction Manual
14
INSTALLING THE ENGINE
Locate the long piece of wire used for the throttle
pushrod. One end of the wire has been pre-bend
in to a "Z" bend at the factory. This "Z" bend
should be inserted into the throttle arm of the
engine when the engine is fitted onto the engine
mount. Fit the engine to the engine mount using
the screws provided.
Must be purchased
separately!
Nut
4x30mm Screw
4mm
4
8
4
4mm Washer
Temporarily install the engine and
make a hole for the throttle rod by
aligning with the position of the
throttle lever.
Throttle rod
PP Pipe
4x30mm
4x30mm
4mm
4mm
4mm
145mm
Throttle Rod
Engine Mount
