TUCANO 60CC
Instruction Manual
16
INSTALLING THE ELEVATOR SERVO
1. Remove the covering from the horizontal
stabilizer.
2. Install two servo to the horizontal stabilizer as
shown.
3. Repeat these step as installing the aileron
control horn
.
INSTALLING THE ELEVATOR LINKAGES
. Repeat these step as installing the aileron
linkages.
3 x 12mm Screw
3 x 30mm Cap Screw
2
4
Nut
3mm
2
3 x 50mm Push rod
2
Aluminum ball
4
4
3mm Washer
3mm Nylon Nut
2
2
Assemble left and right
sides the same way
Cut off shaded portion
Must be purchased separately!
