1
KIT CONTENTS: We have organized the parts as they come out of the box for better
identification during assembly. We recommend that you regroup the parts in the same
manner. This will ensure you have all of parts required before you begin assembly.
MOTOR MOUNT ASSEMBLY
• (4) 4mm x 30mm screws
• (4) 4mm lock washer
• (4) 8mm lock washer
• (8) Nut
FUEL TANK
• (1) Nylon fuel tank
• (1) Metal clunk
• (1) Pre - assembled stopper w / 2 tube
MISCELLANEOUS ITEMS
• (2) Aluminum small dihedral
• (1) Aluminum large dihedral
• (1) 25mm x 600mm trim tape (white)
• (2) Metal connector
• (2) 1.7mm x 800mm metal pushrod
• (1) Spinner/screw
• (2) Wing screws
ADDITIONAL ITEMS REQUIRED
• 60 two stroke Engine
• 90 four stroke Engine..
• 4 channel Radio with 4 servos.
• Glow plug to suit Engine.
• Propeller to suit Engine.
• Protective foam rubber.
• Silicone fuel line.
• Stick on weight for balance.
TOOLS AND SUPPLIES NEEDED
• Medium thick C/A glue.
• 30 minute Epoxy.
• 6 minute Epoxy.
• Hand or Electric drill.
• Assorted drill bits.
• Modeling knife.
• Straight edge ruler.
• Pliers - large and small.
• Wire cutters.
• Masking tape.
• Thread lock.
• Paper towels.
• Rubbing alcohol
KIT CONTENTS
AIR FRAME ASSEMBLIES
• (2) Wing halves with ailerons
• (1) Fuselage with motor mount
• (1) Horizontal stabilizer with elevator halves
• (1) Vertical stabilizer with rudder
MAIN GEAR ASSEMBLY
• (2) Main gear (5mm)
• (2) 60mm diameter wheels
• (4) Wheel Collars (5mm)
• (4) 3mm x 6mm set screws
• (3) Metal straps
• (6) 3mm x 12mm sheet metal screws
NOSE GEAR
• (1) Nose gear (5mm)
• (1) Steering arm (5mm)
• (1) 60mm diameter wheel
• (2) Wheel collars (5mm)
• (2) 3mm x 6mm set screws
• (1) Metal connector
• (1) 4mm x 4mm machine screw
• (1) 1,3mm x 500mm wire
• (1) 3,5mm x 350mm nylon pushrod
ELEVATOR CONTROL SYSTEM
• (1) Nylon clevis.
• (1) Silicone tube
• (1) Nylon snap keeper
• (1) Nylon control horn w/plate
• (2) 2mm x 20mm sheet metal screws
RUDDER CONTROL SYSTEM
• (1) Nylon clevis
• (1) Silicone tube
• (1) Nylon snap keeper
• (1) Nylon control horn w/plate
• (2) 2mm x 20mm sheet metal screws
AILERON CONTROL SYSTEM
• (4) 2mm x 180mm threaded wires
• (4) Nylon clevises
• (4) Silicone tubes
• (4) Nylon snap keepers
• (4) Nylon Thread connectors
• (4) 2mm x 16mm wood screws
• (4) 2mm x 20mm wood screws
• (16) 2mm x 10mm wood screws
Instruction Manual
Trainer 60
