Phoenix Model Tiger Moth, Инструкция по эксплуатации

Страница: 15 / 40

TIGER MOTH
Instruction Manual
14
HORIZONTAL STABILIZER INSTALLATION
1. Using a modeling knife, cut away the covering from
the fuselage for the stabilizer and remove it.
2. Remove the covering from the stabilizer.
When cutting through the covering to remove it,
cut with only enough pressure to only cut through
the covering it's self. Cutting into the balsa
structure may weaken it. This could lead to
possible failure during flight.
3. Repeat step 1 - step 2 from the installing aileron for
the installing elevator.
Make certain plane is aligned accurately
per the diagram. A mis-aligned plane can
fly erraticaliy and cause accidents.
Warning!
Cut off shaded portion
Apply instant glue
(CA glue, super glue).
4mm Spring Washer
4mm Washer
4 x 20mm Cap Screw
2
2
2
4x20mm
4mm