Using the thread and the collar as a guide.
Tape the servo lead into the end of the
thread.
Pull the servo lead out.
Secure the aileron servo box.
Mark the holes from the control horn
onto the bottom of the aileron and
INLINE with the servo arm.
Secure the control horn.
Secure the control horn.
Insert the clevis into the metal rod.
Insert the silicone tube into the clevis.
Insert the clevis to the control horn.
Cut away the metal rod.
Bend “L” the aileron pushrod.
Attach the nylon snap keeper to the
aileron servo arm. And make the same way
for the second aileron servo.
1
4
7
10
13
15
2
3
5
6
8
9
11
12
14
1
1
Installing the aileron servo
Glue the hinges by C.A glue.
Remove the covering.
Instruction Manual
KATANA-EP
2
