9
5.
Operation
For drawing up the Operating Instructions for the end product, you can use the specialist
information described herein. Please bear in mind that these instructions are intended for
you as a specialist and not for the possibly non-technically trained operator of the end
product.
a)
Prerequisites
MEGAMAT 2
The
drive system is only intended for use with corresponding DEWERT control
units.
n this connection please also follow the installation instructions supplied with the
accompanying control unit.
I
b)
Mechanical release functions (emergency or quick release)
MEGAMAT 2
mechanical release
MEGAMAT 2
If you have acquired a
drive system with mechanical release, please note the
following:
A enables you to move the drive manually in an emergency.
Actuate the mechanical release and move the drive into the desired position.
Once the ER or GQR is released and the drive system is restarted, the clutch
automatically re-engages. The drive system is ready to be operated again.
The is available as either a quick release for continued use (”GQR”,
see page 11, 12) or as an emergency release only (”ER”, see page 10), i.e. to be used only
in an emergency.
The electric adjustment drive is not intended for use by small children
or the unsupervised infirm.
The electric adjustment drive is not a toy for children to play with.
Attention!
Caution:
Depending on version, it is possible that the application could lower
itself under its own weight. If application is not possible to sink down
with own weight, you must press down the right side of application.
11/2008
ID-Nr. 48148
