Configuration Creator
4
This section is used for inputting
the parameters and instrument
details that will be used for the
recording
Additional information
1.
Check that the
Receiver
type
is
MTU-5C
2.
Select the
Schedule
1.1.
Manual
or
Automatic Start
1.2. Or
for
a specific schedule use,
Single Shot,
Daily
or
Weekly
and click
Add Schedule
to
define the time and date
3. Channels Settings
4.
Define the Receiver Settings
○ Sampling Mode
○ Sampling Rate
5. Live tool
(see the
manual)
6. Configuration Layout
To use the magnetic sensor data from a different recording or
use a remote reference, all recordings
must
have a matching
Sampling Mode and Sampling Rates. Otherwise, EMpower will
not allow to process data using borrowed channels or remote
reference
1
2.1
2
2.2
3
5
4
6
