Phoenix Contact THERMOMARK ROLL 2.0, Руководство пользователя

Страница: 28 / 54

THERMOMARK ROLL 2.0
28 / 52
PHOENIX CONTACT 108716_en_01
3.4 Printing via FTP
With the File Transfer Protocol (FTP), you can manage and transfer files in the network via
the Ethernet or WLAN interface. For printer management, you require an FTP program (FTP
client) which supports the “binary” transfer mode. The printer acts as an FTP server.
The FTP printer management has three functions:
– Direct printing by copying from JScript files
– Management of the storage media installed on the label printer
– Firmware update
3.4.1 FTP login
To establish an FTP connection, the client must be logged in to the server. The type of login
depends on the client. You must enter the following information in any case:
– IP address of the printer
– User name and password
Access to the printer management functions depends on the user name:
After logging in, you can access the FTP server in the same way you would access a Win-
dows folder.
3.4.2 Sending print data via FTP
You can print the print data in JScript format via an FTP connection.
• Establish an FTP connection to the printer with the user name ftpprint and the specified
password (default: print). An empty folder of the FTP server is displayed.
• Copy the label file in JScript format into the folder of the FTP server.
Printing of the label file starts immediately. After the print job is complete, the associ-
ated file is automatically deleted.
• End the FTP connection.
Table 3-2 Default passwords
Function User name Default password
1
1
Change the passwords via the printer menu (see page 24 )
Printing via FTP ftpprint print
Access to storage medium via FTP ftpcard card
Firmware update via FTP ftpadmin admin