Phoenix Contact IOL MA8 PN DI8, Руководство пользователя

Страница: 9 / 84

Installation
4022_en_A PHOENIX CONTACT
7
3 Installation
3.1 Mounting
To mount on the DIN rail:
1. Place the device on to the DIN rail from above (1), so that the upper housing keyway
hooks on to the top edge of the DIN rail.
2. Hold the device by the housing cover and carefully push the device toward the
mounting surface (2).
3. After the foot is snapped on to the DIN rail, verify that it is attached securely.
Figure 3-1 DIN rail mounting
To remove:
1. Use a suitable screwdriver to release the locking mechanism (1) on the snap-on foot of
the device.
2. Hold on to the device by the housing cover and carefully tilt it upward (2).
3. Remove the device from the DIN rail (3).
Figure 3-2 DIN rail removal