Phoenix Contact GW PL DIO4-BUS, Руководство пользователя

Страница: 19 / 48

Programming
3433_en_C PHOENIX CONTACT
17/46
4 Programming
4.1 Default settings
The default network settings of the GW PL ETH/…BUS are:
4.1.1 Login
1. Set the IP address of the connected PC to the subnetwork of the GW PL ETH/…BUS:
for example, IP = 192.168.254.10, subnetwork = 255.255.255.0.
2. Open a web browser and enter the IP address of the GW PL ETH/…BUS in the
“Address” field (default = 192.168.254.254).
The web server responds immediately.
Figure 4-1 Log-in screen
3. Enter the credentials to access the web server configuration pages. The default
credentials are:
IP address: 192.168.254.254
Subnet mask: 255.255.255.0
Gateway: 0.0.0.0
The default settings are invoked whenever the system is reset.
If the web server does not load, first check the IP parameters of the PC. If everything is set
correctly, check if there are any proxy settings loaded in the web browser. The proxy
setting must be “Load automatically” or “Deactivated” to properly establish
communication.
User name: Admin
Default password: admin