Phoenix Contact CLIPLINE CUTFOX 10, Руководство пользователя

Страница: 56 / 78

CUTFOX 10
3-2
PHOENIX CONTACT 102786_C00_ia
3.3 Selecting the Operating Mode
The present valid values "X" and the selected color are shown on the display.
Repeatedly pressing the "mode" button enables the mode to be selected.
After switching on, the display shows
Auto Mode.
In the Auto Mode the cable cut runs
automactically.
In the display "Remainder" (GO TO)
shows the remaining cable cuts.
Auto Mode
QUANTITY: XXX REST: XXX
LENGTH: XXXXX mm
The display shows Manual Mode if the
"mode" button is pressed 1 x.
In the Manual Mode the cable cut is con-
trolled by the numeric keys "6" and "2".
Manual Mode
LENGTH: (6)
CUTTING: (2)
The display shows PC Mode if the "mode"
button is pressed 2 x.
The cable cut is configured via PC. The
data is transmitted to the CUTFOX 10 and
then it can be selected to start operation.
PC Mode
PROJECT: X D.REC:XX
QUANTITY: XXX GO TO: XXX
LENGTH: XXXXX mm
XXXX mm2 "Color"
The display shows Adjustment Mode if
the "mode" button is pressed for approx.
5 s.
In this mode you can:
– Adjust the cable length
– Set the speed with which the cable is
fed
– Set language and units of measure-
ment (mm or inches)
Adjustment
Mode
ADJUSTMENT: XXXX
SPEED MANU: X
SPEED AUTOM: X
LANGUAGE: X mm