Phoenix Contact CLIPLINE CUTFOX 10, Руководство пользователя

Страница: 55 / 78

Starting Up CUTFOX 10
102786_C00_ia PHOENIX CONTACT
3-1
Engli
s
h
3 Starting Up CUTFOX 10
3.1 Selecting the Installation Site
3.2 Connecting/Switching on CUTFOX 10
Figure 3-1 Connecting CUTFOX 10
• Connect the mains plug on the mains connection (1) and to the socket.
• Switch on the CUTFOX 10 with the mains switch (3) (press I).
The display (4) and the red LED "stop" (5) light up.
The installation site must be level and horizontal.
The following places should be avoided for operation and storage:
– damp or dusty places,
– places exposed to high temperatures, direct sunlight or low temperatures
(operating range: 15°C to 35°C).
Condensation can form if the machine is moved from a cold place to a warm place.
– Before using the CUTFOX 10, open the front door and allow any condensation to
evaporate.
– Do not spill liquids onto the CUTFOX 10.
– Do not expose the CUTFOX 10 to strong vibrations and impact.
Ensure that the mains voltage is correct - see the rating plate (2).