Phoenix Contact 1212463, Руководство по эксплуатации

Страница: 9 / 36

Basic information
105555_en_07 PHOENIX CONTACT
9
English
1.2 Correct use of the battery and charger
The portable crimping tool works with a lithium-ion battery which is sufficient for up to 2000
crimping operations. The wide range power supply unit can be used worldwide with a mains
plug adapter.
Note the following when charging the battery
– To ensure a long service life for the lithium-ion battery, store it without charging it.
– Charge the battery at ambient temperatures from 0°C ...+40°C, ideally at 15°C ... 25°C.
– During charging, the indicator light on the charger lights up red. When fully charged, the
indicator light lights up green.
– Remove the battery from the charger once it has been fully charged and disconnect the
charger from the mains.
– The charging time is 60 minutes, the battery can be used after 20 minutes.
Notes on disposal
WARNING: Important safety notes for lithium-ion batteries
Risk of short circuit, fire, explosion, electric shock or damage to health
– Keep the battery away from metal objects. Paper clips, coins, keys, nails, and other
metal objects that touch the contacts may cause a short circuit.
– Do not submerge the battery in liquids.
– Do not heat or burn the battery.
– Never touch the contact surfaces of the charger.
– Do not open the battery housing. Do not break apart the cells.
Dispose of the used device and battery correctly
The portable crimping tool contains valuable recyclable materials, which should be uti-
lized after the useful life (lifecycle) of the device has ended.
In addition, the crimping tool is equipped with a lithium-ion battery which must be dis-
posed of in accordance with local regulations.
Please support us by contacting your local Phoenix Contact sales office to determine the
best way of returning the old device. Phoenix Contact will then handle the necessary re-
cycling and disposal measures.