Phoenix Contact 1136419, Руководство пользователя, Страница: 10 / 130

RFC 4072R
10 / 128
PHOENIX CONTACT 110146_en_00
2 Transport, storage, and unpacking
2.1 Transport
The device is delivered in cardboard packaging.
• Only transport the device to its destination in its original packaging.
• Observe the instructions on how to handle the package, as well as the moisture, shock,
tilt, and temperature indicators on the packaging.
• Observe the humidity specifications and the temperature range specified for transport
(see Section 14.2 ).
• Protect the surfaces as necessary to prevent damage.
• When transporting the equipment or storing it temporarily, make sure that the surfaces
are protected against the elements and any external influences, and that they are kept
clean and dry.
2.2 Storage
The storage location must be:
– Dry
– Protected from unauthorized access
– Protected from harmful environmental influences such as UV light
– Temperature range: -25°C ... +70°C
– Air pressure: 58 kPa ... 108 kPa (up to 4500 m above mean sea level)
– Permissible humidity: 5% ... 95% (in accordance with DIN EN 61131-2)
2.3 Unpacking
The device is delivered in packaging together with a packing slip that provides installation
instructions.
• Read the complete packing slip carefully before unpacking the device.
NOTE: Electrostatic discharge
Electrostatic discharge can damage or destroy components. When handling the de -
vice, observe the necessary safety precautions against electrostatic discharge (ESD)
in accordance with EN 61340-5-1 and IEC 61340-5-1.
NOTE: Property damage due to noncompliance with ESD notes
If the ESD notes are not observed during unpacking and packing, the device may be -
come damaged.
• Observe the ESD notes during unpacking and packing.