Phoenix Contact 1020882, Руководство пользователя, Страница: 28 / 52

GW PN/ASCII...
26
PHOENIX CONTACT 3886_en_A
3.8.1
Socket configuration
On the “Socket Configuration” page, specify the settings for each socket.
3.8.1.1 TCP configuration
Figure 3-12 “Socket Settings/Socket Configuration/TCP Configuration” page
The TCP configuration specifies how the GW PN/ASCII... connects to a TCP/IP
Raw/ASCII device, such as a bar code scanner.
1. In the “TCP Interface Configuration” group, specify the TCP settings of the Ethernet
port.
Figure 3-13 “TCP Interface Configuration” group
–
Port name: Enter a label for the port. This could correspond to the connected device,
for example “Label Scanner” for easy identification.
–
Enable: This must be checked to use the port as a socket.
– Listen: Check the “Listen” box so that the GW PN/ASCII... listens for incoming TCP/IP
socket connections on the port number specified in the “On port” field.
– On port: Enter the TCP port number on which the GW PN/ASCII... listens for
connections.